Arrow Charts & Safety Data Sheet

 

 
 

AK Series Arrow Selection Chart

         

 Draw Length ------->

24" 25" 26" 27" 28" 29" 30" 31" 32"
25-30 AK400
30-35 AK400 AK400
35-40 AK400 AK400 AK400
40-45 AK400 AK400 AK400 AK400
45-50 AK400 AK400 AK400 AK400 AK400
50-55 AK400 AK400 AK400 AK400 AK400 AK300
55-60 AK400 AK400 AK400 AK400 AK400 AK300 AK300
60-65 AK400 AK400 AK400 AK400 AK400 AK300 AK300 AK300
65-70 AK400 AK400 AK400 AK400 AK400 AK300 AK300 AK300 AK300
70-75 AK400 AK400 AK400 AK400 AK300 AK300 AK300 AK300 AK300
75-80 AK400 AK400 AK400 AK300 AK300 AK300 AK300 AK300  AK250
80-85 AK400 AK400 AK300 AK300 AK300 AK300 AK300 AK250  AK250
85-90 AK400 AK300 AK300 AK300 AK300 AK300  AK250  AK250  AK250

 

 
 

PA Series Arrow Selection Chart

         
  Draw Length -------> 24" 25" 26" 27" 28" 29" 30" 31" 32"
25-30 PA400
30-35 PA400 PA400
35-40 PA400 PA400 PA400
40-45 PA400 PA400 PA400 PA400
45-50 PA400 PA400 PA400 PA400 PA400
50-55 PA400 PA400 PA400 PA400 PA400 PA300
55-60 PA400 PA400 PA400 PA400 PA400 PA300 PA300
60-65 PA400 PA400 PA400 PA400 PA400 PA300 PA300 PA300
65-70 PA400 PA400 PA400 PA400 PA400 PA300 PA300 PA300 PA300
70-75 PA400 PA400 PA400 PA400 PA300 PA300 PA300 PA300 PA300
75-80 PA400 PA400 PA400 PA300 PA300 PA300 PA300 PA300  
80-85 PA400 PA400 PA300 PA300 PA300 PA300 PA300  
85-90 PA400 PA300 PA300 PA300 PA300 PA300      

 

 
 

Speed Freak Series Arrow Selection Chart

       
  Draw Length -------> 24" 25" 26" 27" 28" 29" 30" 31" 32"
25-30 SF650 SF650 SF500 SF500 SF500 SF500 SF500 SF500 SF400
30-35 SF650 SF500 SF500 SF500 SF500 SF500 SF500 SF400 SF400
35-40 SF500 SF500 SF500 SF500 SF500 SF500 SF400 SF400 SF400
40-45 SF500 SF500 SF500 SF500 SF500 SF400 SF400 SF400 SF400
45-50 SF500 SF500 SF500 SF500 SF400 SF400 SF400 SF400 SF400
50-55 SF500 SF500 SF500 SF400 SF400 SF400 SF400 SF400 SF300
55-60 SF500 SF500 SF400 SF400 SF400 SF400 SF400 SF300 SF300
60-65 SF500 SF400 SF400 SF400 SF400 SF400 SF300 SF300 SF300
65-70 SF400 SF400 SF400 SF400 SF400 SF300 SF300 SF300 SF300
70-75 SF400 SF400 SF400 SF400 SF300 SF300 SF300 SF300 SF300
75-80 SF400 SF400 SF400 SF300 SF300 SF300 SF300 SF300  
80-85 SF400 SF400 SF300 SF300 SF300 SF300 SF300  
85-90 SF400 SF300 SF300 SF300 SF300 SF300      

 

 

ArrowTech Archery Safety Data Sheet

Please read before using ArrowTech Arrows.

Safety Precautions: Always inspect your ArrowTech Arrows before shooting. Flex the shaft gradually and look for splitting. Do not attempt to shoot damaged shafts as they may fail causing injury to yourself or your bow. Before shooting, check nocks and points to insure that they are securely fastened to the shaft.

Bow hunting Precautions: As in all hunting situations, when you have harvested your game, inspect the impact area, thoroughly clean the surrounding area of the wound, and make sure you have all fragments disposed of. Ingesting any item, such as broadhead, carbon, aluminum, or other metal fragments can cause harm.

Point-Nock Adapter Installation Instructions:

  1. Cut shafts to length with a high-speed cut-off saw designed for cutting arrows like the Apple cutoff tool. It is a good idea to set a vacuum cleaner hose next to the cutoff tool in order to collect much of the dust from the cutting. Make sure you use a NIOSH approved dust mask and eye protection, such as safety googles, when cutting arrow shafts.
  2. Clean the ends of each shaft with denatured alcohol. It is important to clean out all carbon dust from the inside of the shaft for good adhesion.
  3. Depending on the requirements of installing your inserts, you can use hot melt glues in order to adjust your broadheads (but expect to lose inserts), quick drying glues (cyanoacrylates) such as Goat Tuff etc.(make sure you can push the insert in immediately and once the inserts are in, do not expect to be able to move them), or two part epoxy (can adjust your broadheads once!). CAUTION! Do not apply flame directly to any carbon shafts. Do not soak carbon shafts in any kind of solvent. Flex the shaft after each shot! The best way to flex the shaft is to hold the end of the shaft with one hand. Lay the other end of the shaft on your knee. Then press in the middle of the shaft with your other hand and roll the shaft (the Flex Test and Roll Method). Do not shoot any shaft that has a crack in it. Inspect all nocks and shafts prior to each use. Remove any nock that is damaged.

CAUTION! NEVER SHOOT A DAMAGED ARROW.